Preventative HVAC and Plumbing Maintenance in West Milford NJ

preventive maintenance newfoundland nj

 

With regular maintenance you will prevent small problems from becoming big problems and ensure optimal performance of your comfort system.  We also offer annual service agreements, which can reduce the cost of a Performance Tune-Up.

Regular maintenance will:

  • Provide longer lasting equipment
  • Reduce utility bills
  • Reduce repairs
  • Provide a more comfortable indoor environment
  • Protect your investment

What we do during a Performance Tune–Up:

Performance Furnace Tune–Up

  • Test for carbon monoxide leaks
  • Clean burner assembly
  • Clean ignition assembly
  • Clean blower motor
  • Inspect filtration system
  • Adjust blower components
  • Lubricate moving parts as required
  • Test and adjust safety controls
  • Tighten electrical connections
  • Calibrate thermostat
  • Check flue draft
  • Check combustion
  • Inspect vent piping
  • Inspect humidification system

Performance Fan Coil Tune–Up

  • Inspect evaporator coil
  • Clean blower motor
  • Inspect filtration system
  • Adjust blower components
  • Lubricate moving parts as required
  • Test and adjust safety controls
  • Tighten electrical connections
  • Calibrate thermostat
  • Inspect humidification system
  • Inspect electrical heating elements

Performance Air Conditioner Tune–Up

  • Clean condenser coil
  • Inspect evaporator coil if accessible
  • Clean condensate drain
  • Clean blower motor
  • Inspect filtration system
  • Adjust blower components
  • Lubricate moving parts as required
  • Inspect for refrigerant leaks
  • Test condensate pump
  • Tighten electrical connections
  • Test starting capabilities
  • Measure air temperature differential
  • Monitor refrigerant pressure
  • Measure amperage and voltage

Air Conditioning System Start-Up and Inspection

This service will be performed by our highly trained and certified HVAC technicians.

  • Check thermostat display Change batteries if needed. (Customer supplied)
  • Inspect air filter in system (Replace with customer supplied filter)
  • Flush condensate line and inspect
  • Inspect and remove debris from condenser area
  • Monitor cooling cycles
  • Measure temperature differential
  • Measure component amperage and voltage draws
  • Inspect connectors, motors, relays, electrical boards
  • Measure caps and report measurements
  • Test/Inspect all safety controls
  • Inspect blower assemble
  • Check air flow
  • Tighten loose wiring connections
  • Review findings and recommendations to home owner